Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Does micArray_vf_spk_v1.3_up.bin have a HID interface 7 months 6 days ago #57821

  • pascaldao
  • pascaldao's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0
Hello,

I am attempting to get the DOA angle from a UMA-8 mic array. But whenever I try to open the device using the HID interface I get "hid.HIDException: unable to open device". When I first received the mic arrays I was able to use hid to read DOA angles. However, since then I flashed the RAW firmware and later flashed the SPK firmware v1.3. I am not able to use the hid interface either from the RAW firmware or SPK v1.3. Does micArray_vf_spk_v1.3_up.bin have a hid interface? If so, why might I be getting this exception? If not, which firmware version does, and can I please have the binary?

Regards,

Pascal.

Please Log in or Create an account to join the conversation.

Does micArray_vf_spk_v1.3_up.bin have a HID interface 7 months 2 days ago #57875

  • pascaldao
  • pascaldao's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0
Hello,

Any updates?

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam