Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

UMIK-X Microphone Array and REW Pro Version 3 weeks 6 days ago #56018

  • shauk
  • shauk's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
Hallo

We have recently brought the UMIK-X microphone array from miniDSP including the REW Pro version license. I have a question regarding performing a measurement.

The miniDSP user manual describes a multichannel measurement using REW, but that uses ASIO drivers and playing the signal from REW itself or from the measurement PC to the loudspeaker. Then it gives the option to have an rms average of the magnitude of all the channels captured. We want to have the same feature but our measurement setup and requirements is different as below

We want to perform the same measurement as above inside a car, but the measurement signal will be played externally (Pink Noise) from the car sound system. So my question is how can we do the setup to perform the measurement using the external signal and get the same results as above.

shauk

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam