Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

UMA 16 mounting brackets 4 years 4 months ago #40023

  • cbunks
  • cbunks's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
Hi all,

I've just noticed that there are four mounting brackets at the bottom of the front of the microphone PCB. I'd like to use these to mount the unit on a bracket that I can then attach to a small tripod. Can anyone tell me what mounting bracket screws I should use? Also, I would welcome any links to L-shaped brackets with the appropriate hole spacing.

Thanks!

Carey

Please Log in or Create an account to join the conversation.

UMA 16 mounting brackets 4 years 4 months ago #40131

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9162
  • Thank you received: 1461
@Carey

These M3 mount on the PCB are just for a custom mount we did for a customer. We don't have a bracket.
You can see the spacing hole to hole from p7 of the user manual (40mm)

DevTeam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home
The following user(s) said Thank You: cbunks

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam