Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

No audio input/output on Windows 10 5 years 1 month ago #36730

nsquared
Topic Author
Offline
New Member
Posts: 1
Thank you received: 0

Hi all,

I have installed the UAC2 v4.11.0 windows drivers, mic array plugin and the XMOS firmware. The mic array firmware is able to connect to the board, and the board is recognised as a speaker and recording device in windows, but does not show any noise levels from the microphone or playback from the 'Sound' panel. Nothing shows on the 'Sound Location' tab on the mic-array firmware either, but the board will show the DOA of sound on the LED's.

I am not sure if I have missed a step but any support with this issue would be greatly appreciated.

Please Log in or Create an account to join the conversation.

No audio input/output on Windows 10 5 years 2 weeks ago #36931

ponots Offline New Member Posts: 1 Thank you received: 0	I also have the same issue. I am not able to record anything on windows10 using the miniDSP mic. Device : UMA-8 USB mic array - V2.0 OS : Windows 10 Pro for workstations Driver installed : micArray_VF_RAW_v1.0.zip
	Please Log in or Create an account to join the conversation.

No audio input/output on Windows 10 5 years 1 week ago #37014

devteam
Away
Administrator
Posts: 9163
Thank you received: 1461

Dear both

Just to clarify, if your PCB says "rev0.6", you have a rev2 board. Please make sure to upgrade the firmware to the rev2 firmware loaded on the user downloads section. The correct firmware to be loaded is called "micArray_vf_spk_v1.0_up.bin"

DevTeam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

No audio input/output on Windows 10 4 years 11 months ago #37518

vntana Offline New Member Posts: 2 Thank you received: 0	I'm still having this issue with my UMA-8, I downloadedthis driver for my Win10: miniDSP_UAC2_v4.11.0_2017-06-19_setup.exe and upgraded to this firmware: micArray_xvsm_v1.5_Up.bin . I can see that the recording device is picking up audio, but when i connect it to the micarray, it doesn't show sound location nor does it blink the mic leds
	Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

USB Mic Array

No audio input/output on Windows 10