Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Select sample rate with RAW firmware 5 years 8 months ago #35112

david93zgz
Topic Author
Offline
New Member
Posts: 2
Thank you received: 1

Hi,

I'm using the RAW firmware to record the signals of the 7 mics using Audacity in a Windows PC. I can increase the sample rate of the Audacity project but the signal bandwidth is still limited to 5Khz, so the UMA is still sampling at 11,025Hz. The user manual says "Sample rates are available as 11.2/16/32/44.1/48kHz" for the RAW firmware but in the miniDSP UAC2 Control Panel the Current Sample Rate is fixed at 11,025Hz. How can I change it?

Thanks.

Please Log in or Create an account to join the conversation.

Select sample rate with RAW firmware 5 years 8 months ago #35204

devteam
Away
Administrator
Posts: 9175
Thank you received: 1481

@ david93zgz

Sample rate is configured by the project you define under your ASIO powered software. (ie. when you start the project, it will force the recording to that sample rate). Is audacity able to support ASIO? I didn't know it was the case... maybe they changed?

Make sure that a)you're using miniDSP's ASIO driver b) you're using a software able to support ASIO.

DevTeam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

The following user(s) said Thank You: david93zgz

Please Log in or Create an account to join the conversation.

Select sample rate with RAW firmware 5 years 8 months ago #35212

david93zgz Topic Author Offline New Member Posts: 2 Thank you received: 1	I tried with a ASIO compatible software (Cubase) and it works fine. Thanks! The following user(s) said Thank You: devteam
	Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

USB Mic Array

Select sample rate with RAW firmware