Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

VAD setting explanation 6 years 4 weeks ago #33210

ns1234 Topic Author Offline New Member Posts: 3 Thank you received: 0	Can someone please explain these settings? VAD Detect Time VAD Timeout VAD Threshold Enter VAD Threshold Exit The PDF says VAD Detect Time defaults to 2 and timeout to 50, however I see 4000 and 2000 for those and 2 and 50 for enter and exit. Enter and exit aren't mentioned in the PDF at all!
	Please Log in or Create an account to join the conversation.

VAD setting explanation 6 years 4 weeks ago #33212

ns1234 Topic Author Offline New Member Posts: 3 Thank you received: 0	I guess VAD is only relevant for DOA? DOA isn't important for me. What I want is to improve accuracy for giving voice commands to control lights, etc. Are the default setting ideal for that? Is there a guide or something on how I can adjust settings for my specific environment?
	Please Log in or Create an account to join the conversation.

VAD setting explanation 5 years 11 months ago #34042

ns1234 Topic Author Offline New Member Posts: 3 Thank you received: 0	Hello? Is anybody home? I bought your $100 microphone, would be cool to have some answers on how to use it.
	Please Log in or Create an account to join the conversation.

VAD setting explanation 5 years 10 months ago #34058

devteam
Away
Administrator
Posts: 9177
Thank you received: 1486

@ ns1234

Sorry for missing this post. Remember that this is a "community powered forum" (as explained above all sections of forum). Our team can always help by starting a tech support support ticket (support.minidsp.com) if any specific/urgent question. Thanks!

These settings shouldn't require much tuning unless you have a specific application. It's for Voice Activity Detection to help for Voice to Speech detection (i.e. start recording). Check out the latest plugin/firmware online. It has solved some bugs. You shouldn't have to tune any of these settings to get a simple setup as yourself. DOA (Direction of arrival) are related VAD but not the same.

Devteam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

USB Mic Array

VAD setting explanation