Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

UMA-8 XMOS JTAG connector 6 years 3 months ago #32148

DomoLogo Topic Author Offline New Member Posts: 1 Thank you received: 0	I'm trying to get information about how I can replace the UMA-8 mic array signal processing with my own as direct access to the 8ch of microphones is not currently available. Looking at the spec sheet it would appear that there is a JTAG connector "for custom code." Is this something I would be able to utilize, if so how? Assuming that it would require utilizing the XMOS dev kit.
	Please Log in or Create an account to join the conversation.

UMA-8 XMOS JTAG connector 6 years 3 months ago #32168

devteam
Away
Administrator
Posts: 9173
Thank you received: 1480

@ DomoLogo,

Good news! The raw mode firmware is now available. Simple firmware upgrade of the xmos as per user manual. Please check out the user downloads section. It's all there!

There is indeed a JTAG port but so far don't have a release time for JTAG + XMOS.

DevTeam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

USB Mic Array

UMA-8 XMOS JTAG connector