TOPIC:

Help needed I have just set up my new subs, each one is housed in a custom 700mm wide, 600mm high, 700mm deep box, originally it sounded great then once I applied some filters from REW it messed up it is no longer acting like a sub but a speaker. I have since removed the filters hoping it would bring back the sound of the sub but it has stayed the same like no filters where applied. I have attached pictures of the current REW results, and setup. The Dayton Audio are not sounding any different than my previous monolith plus subs. It seems like the speakers are acting as high pass all of a sudden. I have tried changing every part of the setup including using the amp from one of the monolith plus subs to power one of them. I have also tried it without the miniDSP connected to see if that would make a difference, however this did not change anything either. Please help this is driving me crazy all I want to hear is the deep bass shaking down my house   

Setup is as follows

• Yamaha RX-V585 AVR also tried Denon X3400H
• to MiniDSP 2x4 HD
• to Cleanbox Pro
• to Behringer NX4-6000 
• to Dayton UM18-22