Welcome, Guest
Username: Password: Remember me
All tutorials related to sub tuning/eq/integration with other units.
  • Page:
  • 1

TOPIC:

Minisharc sub integration 6 years 8 months ago #30106

  • Jeremywakeham
  • Jeremywakeham's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 4
  • Thank you received: 0
Hi, I'm new to the forum, so please be gentle.

I have a minisharc running in input slave with the minidac8 firmware and bclk +lrclk io reversed as subject of another post.

Input to minisharc is by toslink to i2s board and i2s outputs 1/2 feed a dac going to my valve amp and some satellite speakers. I2s output 3/4 goes to another dac feeding an active sub. Minisharc is working as a crossover and will have some room/system correction when I have time

The sound is good, but without running 2 cables to my sub is there any easy way to mix outputs 3/4 into mono so I get the bass from both channels?

I understand there won't be much stereo signal, but the level meters on output 3/4 are not exactly aligned.

Many thanks for any input

Please Log in or Create an account to join the conversation.

Minisharc sub integration 6 years 8 months ago #30108

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 3778
  • Thank you received: 1594
Use the routing matrix?
The following user(s) said Thank You: devteam

Please Log in or Create an account to join the conversation.

Minisharc sub integration 6 years 8 months ago #30109

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 3778
  • Thank you received: 1594
As per the last screenshot in this app note:

www.minidsp.com/applications/digital-cro...s/stereo-34way-xover

I think that's what you're asking - ?
The following user(s) said Thank You: devteam, Jeremywakeham

Please Log in or Create an account to join the conversation.

Minisharc sub integration 6 years 8 months ago #30162

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9180
  • Thank you received: 1487
@ Jeremywakeham

Did you figure it out? Send us a pic of your routing matrix. As John said, it's indeed all possible in the routing Matrix.

Devteam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Minisharc sub integration 6 years 8 months ago #30167

  • Jeremywakeham
  • Jeremywakeham's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 4
  • Thank you received: 0
Thanks all. Got it now.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam