TOPIC:

Hello,

Are the digital outputs configurable?   I would like to setup an active speaker system and configure Outputs 1&2 as Left and Outputs 3&4 as Right.  This will allow me to place the amp at or into the speaker enclosure.

Manual only shows 1&2 and 3&4 as L/R combination

Don't see anything that shows this type of support.

Thx.

 

mfb wrote:

Are the digital outputs configurable?   I would like to setup an active speaker system and configure Outputs 1&2 as Left and Outputs 3&4 as Right.  This will allow me to place the amp at or into the speaker enclosure.
 

Yes, you can do this. Each output channel can be defined to be whatever you want via the Routing Matrix shown on page 47 of the SHD manual.

Thanks for the assist.   Pretty obvious function of the 2x4 switch...

Been away from the SHD for awhile.  Constantly confused with Dirac 1=L and Dirac 2=R.

Plan on running (2) of the Peachtree GaN1s straight from the SHD to an active speaker setup using Camerton Binom's and Purifi woofers.

Sound be a fun experience.