Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Challenge: One SHD w/ 2 x 2.1 Zones 2 months 1 week ago #59875

  • alan-watts
  • alan-watts's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 0
Hi.  I am trying to use one SHD to run two zones/rooms, each with a 2.1 music setup. I would like to have different dirac corrections for each room, for which i plan to use groups and zones.  The best I came up with at this moment is to use xlr y splitters to the mains from outputs1/2, and use outputs 3/4 mono to each sub.  This works fine when running each zone separately as different presets, but I also want to be able to run the two zones concurrently on preset 3, while maintaining unique dirac settings for each zone.  I just don’t know if it’s possible to get the wiring right for this.  I am open to using splitters, switches, etc… I’d just like to avoid spending another $1300 on a second SHD!  Any ideas would be much appreciated.

Thank you.

Please Log in or Create an account to join the conversation.

Last edit: by alan-watts.
  • Page:
  • 1
Moderators: devteam