TOPIC:

Hi,

Can the SHD route it's analog input to a network stream, so I can listen to vinyl in another room?

Thanks.
Richard

absolutely not !

The LAN port on the rear is only for the Volumio board.

You can digitize an analog stream and route it wirelessly using Logitech Media Server / squeezelite relatively easily. This link has some basic instructions ->  Integrate analogue audio devices into your multi-room system | HiFiBerry .

I use a Raspberry Pi 3 with a HifiBerry ADC+ Pro but you should be able to do this with any ADC (either USB or HAT) that works with a RPi3/4. SHD can also function as an ADC with USB output to a RPi but setup would be complicated by the fact that any processing on the SHD will be applied to digitized signal and you probably do not want x-overs / EQ / Dirac applied to your other room. Probably best just to get a separate ADC.

It's a nice setup because you can locate the turntable far away from your listening area and use multiple squeezelite endpoints to play the stream in different rooms.

Michael

Hi Michael, nice to meet you

Maybe could you help me, I development a IoT solution and I want to use a Raspberry Pi 4 + UMIK-1, do you know is the mic UMIK-1 has driver for Raspbian SO?

I have not used the UMIK-1 on a RPi but the UMIK-1 is listed as being compatible with Linux and USB class compliant so I believe it should work.

Michael