Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1
  • 2

TOPIC:

SHD Display failing 7 months 3 weeks ago #57133

  • Ultrasonic
  • Ultrasonic's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 2016
  • Thank you received: 397

basically I was changing settings in the PC minidsp software and had no effect on the display behaviour (dimming)

Which could indeed have been because you didin't have the appropriate firmware version installed.

Please Log in or Create an account to join the conversation.

SHD Display failing 7 months 2 weeks ago #57236

  • czupet
  • czupet's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 43
  • Thank you received: 2
Dud, what is your point here? I think it is quite obvious that one of the firmware releases fixed this bug. It works now. But it shattered the display before I got it installed. This is my point here.

Please Log in or Create an account to join the conversation.

SHD Display failing 7 months 2 weeks ago #57237

  • Ultrasonic
  • Ultrasonic's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 2016
  • Thank you received: 397

Dud, what is your point here? I think it is quite obvious that one of the firmware releases fixed this bug. It works now. But it shattered the display before I got it installed. This is my point here.

I do understand and I both sympathised and explained why I asked what I had in posts above.

Have you contacted miniDSP support about this? That is the correct route to try to get the issue addressed.

Please Log in or Create an account to join the conversation.

SHD Display failing 4 months 3 weeks ago #58376

  • mraynelson
  • mraynelson's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 4
  • Thank you received: 0
Yes, having the same issue (your pictures made it very easy to the behavior is the same). The issue started only after upgrading to the latest firmware version from SHD_v1_15_fw_v1_29. 

Were you able to fix the issue?

Thanks,
Mike

Please Log in or Create an account to join the conversation.

SHD Display failing 4 months 3 weeks ago #58383

  • czupet
  • czupet's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 43
  • Thank you received: 2
I had the display replaced in my unit. I set it to the lowest brightness and dim after 5 seconds. Hoever I see that the full brightness get stuck from time to time. I need to switch it off and on again to bring it back to normal. The guys have some issues with source code management if the same bug is back. 

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Moderators: devteam