TOPIC:

Hello everyone

Current situation
Streaming music with Denon AVC x6700h (powering 2 x SVS SB300 with LFE channel) --> XTZ edge A2-400 power amp--> speakers

I would like to use a MiniDSP SHD for 2.2 music listening seperated from the Denon.
Can I connect both the Denon (on the rca-input of poweramp)) and the SHD (on the XLR-input of poweramp) to the XTZ?
How do I connect my subwoofers? Switch or also directly with 2 cables entering the subwoofer.

Thank you so much

The SHD has 4 assignable outputs, you can assign 1/2 to your LR out to the amp and 3/4 to your Subs with the subs splitting left/right channels or run mono(combined L/R) signal to each sub on output 3/4 and treat it as a LFE with the cutoff chosen in the SHD program. 

By running the signal into the DSP you can integrate the subs through Dirac or the SHD program and dial in your crossovers. 

I have the SHD running 2 XLR into a crown stereo amplifier and 2 into dual 10-inch studio subwoofers. 

If your Denon has a digital optical out you could run that into the SHD and treat it like an active crossover too. 

Hope that helps, it took me some time to get my setup dialed in but it rocks now!