Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Can minidsp skip the filter and DSP part? 3 years 3 months ago #50494

  • demi1234
  • demi1234's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
i mean,
I know that this minidsp will handle the signal as 96khz internally

Is it possible to let the source signal(24/192) just pass through the DSP part and keep the 24/192 source up to the line level input?

like, 24/192 source from network drive > minidsp dac > minidsp pre-amp section> int-amp’s line level input > power amp.?

coz i might use the dsp filter not regulary.

Thank you!

Please Log in or Create an account to join the conversation.

Can minidsp skip the filter and DSP part? 3 years 3 months ago #50495

  • mvs0
  • mvs0's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 50
  • Thank you received: 6

i mean,
I know that this minidsp will handle the signal as 96khz internally

Is it possible to let the source signal(24/192) just pass through the DSP part and keep the 24/192 source up to the line level input?

like, 24/192 source from network drive > minidsp dac > minidsp pre-amp section> int-amp’s line level input > power amp.?

coz i might use the dsp filter not regulary.

Thank you!


When I asked minidsp about the possibilty of bypassing the dirac block they said it will always in the signal path (but with a transparant filter).
So that alone can answer your question with a no.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam