Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC:

Way to go for vinyl through SHD 2 years 5 months ago #49680

  • entripy
  • entripy's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 387
  • Thank you received: 130
Unfortunately the OP was using the 47k load setting. The lower loads do lower gain as the manual describes but caused other problems because they are intended for MC. So although your suggestion is most sensible, the OP's experience suggests the A.R. is not sensible.

In fact, what you suggest is so sensible, and so easy to implement when the loads are presumably switched by remote controlled relays, that I'm starting to wonder whether the A.R. is broken, whether a relay to switch gain might be stuck,

Please Log in or Create an account to join the conversation.

Last edit: by entripy. Reason: more thoughts

Way to go for vinyl through SHD 2 years 5 months ago #49699

  • mollie
  • mollie's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 14
  • Thank you received: 1
Hi again,
That's why i proposed that you have to contact a professional about this issue!!!

Please Log in or Create an account to join the conversation.

Moderators: devteam