|
Welcome,
Guest
|
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!
If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
TOPIC:
Switch off SHD via remote controlled power socket 3 years 5 months ago #45420
|
Hi all,
I recently used the IOTAVX AVX1 as a pre-amp for music and cinema. I only drive a 2.0 setup with two B&M speakers. Up to now I used the IOTAVX as "input" for my trigger power strip. So when I turned on the pre-amp, all the other necessary devices get current as well. Now with the MiniDSP SHD I don't have the option to turn it on, because there is no option for it. I read that it is designed as a "always-on" device which has very minor power consumption. But in that case it will not trigger my power strip. I thought I can probably use a remote controlled power socket to turn the MiniDSP SHD on that way and I would like to get your opinion herefor. Do you think the "durability" is better if I keep it on all the time or turn it on/off via a remote controlled power socket? Thank you in advance  |
|
Please Log in or Create an account to join the conversation. |
Moderators: devteam