Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Help - no test tones in DLCT 4 years 2 weeks ago #42311

dem626 Topic Author Offline New Member Posts: 14 Thank you received: 2	Trying to use DIRAC calibration with my SHD. Starting with a stereo calibration as recommended in the manual. I cannot get any test tone sound. I don't think it is the USB cable because I can see signal levels on inputs and outputs with the SHD plugin. Hopefully something simple but I'm struggling and getting nowhere! Can anyone think of what to try to fix? Thanks, Doug
	Please Log in or Create an account to join the conversation.

Help - no test tones in DLCT 4 years 2 weeks ago #42312

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1593	Probably best to follow the steps in the manual.
	Please Log in or Create an account to join the conversation.

Help - no test tones in DLCT 4 years 2 weeks ago #42313

dem626 Topic Author Offline New Member Posts: 14 Thank you received: 2	I mentioned I was following the manual. Anyone have anything useful or know what could cause this?
	Please Log in or Create an account to join the conversation.

Help - no test tones in DLCT 4 years 1 week ago #42315

jaaptina Offline Premium Member Posts: 123 Thank you received: 43	The first time I used Dirac I got no sound because I forgot to set the input on the SHD Studio to usb. The following user(s) said Thank You: dem626
	Please Log in or Create an account to join the conversation.

Help - no test tones in DLCT 4 years 1 week ago #42317

dem626 Topic Author Offline New Member Posts: 14 Thank you received: 2	Oh good grief! That was it. I guess this should have been obvious but it wouldn't hurt to add it to the manual.... Up and running now. Thank you jaaptina. Doug
	Please Log in or Create an account to join the conversation.

Help - no test tones in DLCT 4 years 1 week ago #42332

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1593	Hm, well I just tried it, and DLCT doesn't care which input is selected to do the calibration. Which is consistent with how it works... The following user(s) said Thank You: dem626
	Please Log in or Create an account to join the conversation.

Help - no test tones in DLCT 4 years 1 week ago #42340

dem626 Topic Author Offline New Member Posts: 14 Thank you received: 2	It works on all sources EXCEPT LAN, at least for me. Thanks for your help. John! Doug The following user(s) said Thank You: devteam
	Please Log in or Create an account to join the conversation.

Help - no test tones in DLCT 4 years 4 days ago #42524

devteam
Away
Administrator
Posts: 9163
Thank you received: 1461

Hi Doug

you're indeed correct! There is a limitation that we indeed need to document. Test tone won't operate if you're in the LAN mode.

Thanks for the warning for us to add it and sorry you had that issue! Hoping you're enjoying your unit now. :-)

DevTeam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

SHD Series

Help - no test tones in DLCT