Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Windows only? 8 years 10 months ago #13076

knuckle_head Topic Author Offline New Member Posts: 14 Thank you received: 0	I've been tinkering with 2x4 MiniDSP kits on my Mac - bought a PowerICE unit because it has all the components I've been building with, but it appears control of the DSP is limited to Windows environments. Is this so?
	Please Log in or Create an account to join the conversation.

Windows only? 8 years 10 months ago #13104

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1593	Currently it is. I believe devteam stated earlier that it's an issue with porting the Ethernet bridge software that they use.
	Please Log in or Create an account to join the conversation.

Windows only? 8 years 10 months ago #13121

knuckle_head Topic Author Offline New Member Posts: 14 Thank you received: 0	john.reekie wrote: Currently it is. I believe devteam stated earlier that it's an issue with porting the Ethernet bridge software that they use. How difficult a task do you suppose it is to swap in a 2x4 balanced kit to replace the board they've mounted?
	Please Log in or Create an account to join the conversation.

Windows only? 8 years 10 months ago #13130

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1593	Hm, don't know, but I think it would be easier to just get access to a Windows machine to program it
	Please Log in or Create an account to join the conversation.

Windows only? 8 years 10 months ago #13139

knuckle_head
Topic Author
Offline
New Member
Posts: 14
Thank you received: 0

john.reekie wrote:
Hm, don't know, but I think it would be easier to just get access to a Windows machine to program it

If it were merely a matter of one program and control of a single driver that would be fine - and I will do this for the sake of proof-of-design - but the board affixed to this amp is limiting in that it will not allow high pass for an analog external sound source, among other things. There is more malleability in the 2x4 balanced kit - nearly-perfectly designed for my purposes . . . . .

Please Log in or Create an account to join the conversation.

Windows only? 8 years 10 months ago #13144

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1593	knuckle_head wrote: the board affixed to this amp is limiting in that it will not allow high pass for an analog external sound source, among other things. Hi again, the high pass is in the Xover block.
	Please Log in or Create an account to join the conversation.

Windows only? 8 years 10 months ago #13145

knuckle_head Topic Author Offline New Member Posts: 14 Thank you received: 0	john.reekie wrote: Hi again, the high pass is in the Xover block. Right - with no external analogue output to send it to. Only the two internal channels that feed the amp. Am I right or wrong about this?
	Please Log in or Create an account to join the conversation. Last edit: by knuckle_head. Reason: word correction

Windows only? 8 years 10 months ago #13146

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1593	I see what you mean, you want high passed outputs to feed the mains (assuming that you're using the amp for a sub and that the mains have no DSP in the path). You're right, that isn't possible.
	Please Log in or Create an account to join the conversation.

Windows only? 8 years 5 months ago #15225

devteam
Away
Administrator
Posts: 9143
Thank you received: 1452

knuckle_head wrote:
I've been tinkering with 2x4 MiniDSP kits on my Mac - bought a PowerICE unit because it has all the components I've been building with, but it appears control of the DSP is limited to Windows environments. Is this so?

Great news it is that the Mac version is now available.. :-)

See details here for more info.
www.minidsp.com/forum/pwr-ice-support/10...nta-s-summer-release

Have fun,

miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

PWR-ICE

Windows only?