Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1


Questions on PWR-ICE 125 Setup & Use 1 year 4 months ago #58815

  • barjohn
  • barjohn's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
I recently received 2 PWR-ICE 125 plate amplifiers with the boxes.  The only documentation appears to be the online manual.  My questions for you more experienced users are:
1. Are they'd delivered with the most current firmware or do they have to be upgraded after downloading the plugins?
2. I am using these as either mono-blocks or 2 channel amplifiers, what should the output levels be set to if you will be controlling volume from your input source?
3. When I export EQ filters from REW, they appear to be only biquads and not PEQ.  The Biquads do not appear to create the same results as manually entering the PEQ values shown in the EQ filter on REW.  Also, there does not appear to be a way to keep it from generating more Biquads than the EQ settings available in the input (12) and only 6 available in the output.  Is there a way to get PEW setting sent into the channels instead of Biquads?  Is there a way to manage the number generated in REW?
4. Is there a simple way to do a reset on the filters on an input or output channel other than one-by-one removal?
5. On Biquads, does one need to press process on each Biquad EQ?  I can't see any difference.
6. Should one use the input channels or the output channels?  Can you use both input & output to get 18 EQ parameters?
7. On REW when using the EQ function and selecting the Equalizer there is no setting for the PWR-ICE, only MiniDSP, and MiniDSP 2x4HD, should one use one of these settings or the Generic?

Thanks in advance for any help.  The instructions on auto EQ with REW are so out of date with the screens no matching the current REW screens that it needs to be updated.  If someone can clarify those instructions it would be helpful to us newbies.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam