Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

PWR-ICE125 with dual voice coil subwoofer 3 years 7 months ago #36110

  • scott83
  • scott83's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
Hey all,

I am currently running a Sonos system with 4x Connect Amps and I would like to add an outdoor subwoofer for my outside deck speakers. I have been looking at the Polk Atrium Sub10. The specs on the Sub10 are:

Dual 2" voice coil, 8ohm, rated at 200W per coil.

Would I be okay to use a PWR-ICE125 set in BTL mode, and connect the two sub voice coils in parallel to it? That would give me a 4ohm load and the 450W output of BTL mode should be plenty to drive the 2x200W coils, correct?

Thanks,
Scott.

Please Log in or Create an account to join the conversation.

PWR-ICE125 with dual voice coil subwoofer 3 years 6 months ago #36208

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Administrator
  • Posts: 8971
  • Thank you received: 1299
@ Scott

The PWR-ICE125 would be fine it would sound.. For subs we'd typically recommend the PWR-ICE250 for ample power but you should be fine with your setup!

DevTeam
miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam