Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

PWR-ICE 125WD build in dimensions 6 years 1 week ago #32040

  • joosteijkenboom
  • joosteijkenboom's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 10
  • Thank you received: 0
Hello,

Could anybody tell me what the build in dimensions are for the PWR-ICE 125WD (so not the plate but the part behind the plate)? I would like to mount them in a board, so I need to cut out a hole big enough for the module to fit in, but hopefully small enough so the board keeps some strength.

If anybody could help me it would be great, as I am building it this weekend but don't have my amp in the place I am building.

Thank you.

Please Log in or Create an account to join the conversation.

PWR-ICE 125WD build in dimensions 5 years 11 months ago #32151

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9162
  • Thank you received: 1461
Hello

Sorry for missing your post.. An opening of 137 x 166 should do it. That's what we did here based on some drawings of a demo box we built.

HTH

devTeam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam