Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Wrong tech spec for PWR ICE 125 & 250 6 years 8 months ago #26367

Fabri Topic Author Offline New Member Posts: 7 Thank you received: 0	Hello, I've checked the dimensional technical specification on minidsp site for the items above, probably there is an error because the plate dimension is exactly the same 153 x 216mm but from the picture the 250 seems to be 50mm more. Could you please check the drawings and give me some feedback? Thanks
	Please Log in or Create an account to join the conversation.

Wrong tech spec for PWR ICE 125 & 250 6 years 8 months ago #26368

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1593	According to the ICE-PWR250 web page and the user manual it is 267mm high.
	Please Log in or Create an account to join the conversation.

Wrong tech spec for PWR ICE 125 & 250 6 years 8 months ago #26369

Fabri Topic Author Offline New Member Posts: 7 Thank you received: 0	Thanks john! now is ok!
	Please Log in or Create an account to join the conversation.

Wrong tech spec for PWR ICE 125 & 250 6 years 8 months ago #26387

devteam Offline Administrator Posts: 9145 Thank you received: 1456	Thanks for the warning Fabri! All updated now and sorry for this mishap from our web page, some typo... The PDF datasheet is the reference. DevTeam miniDSP, building a DSP community one board at a time.
	Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

PWR-ICE

Wrong tech spec for PWR ICE 125 & 250