Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Master Volume no funktion 8 years 8 months ago #14839

hoerbyjurt
Topic Author
Offline
New Member
Posts: 4
Thank you received: 0

Hello
a have receive 4 ICE125 and 2 ICE 250. By one ICE125 and one ICE250, the master volume pot have no funktion.
My setup: analog in, stereo mode. Input Gain 0dB. All jumpers are closed.
When I swich on, the volume is full and sounds fine. Also in the controller software, both channels show about -90dB, also by minimum volume.
By the correct operating modules, the contoller software show at both channels about -132dB at the minimum.
Where are the problem?
How is the newest firmware? The modul are coming with the version 3.0, the downloadable version is 2.0.
Thanks for a fast answer.

Please Log in or Create an account to join the conversation.

Master Volume no funktion 8 years 8 months ago #14923

devteam
Offline
Administrator
Posts: 9145
Thank you received: 1456

Hello,

Ok, just to double confirm here. What do you mean exactly by the master volume pot doesn't work?
Based on the reading you're showing here, the levels on the RMS meters are very low (almost at noise floor). Testing the volume control is part of the QC procedure so we must be missing something here..

Once we understand a bit more, we can take it from there. Thanks for your help.

DevTeam

miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

PWR-ICE

Master Volume no funktion