Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Nano AVR with 11.x 7 years 5 months ago #12793

  • MX48
  • MX48's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 12
  • Thank you received: 0
For those of us that use height and wide speakers, how does the Nano deal with that and will I be able to eq those extra speakers independently.

Thanks.

Please Log in or Create an account to join the conversation.

Nano AVR with 11.x 7 years 5 months ago #12827

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
The nanoAVR can only equalize what's going down the HDMI pipe, which is 8 channels of audio. The extra speakers are derived from those 8 by the AVR - how exactly I don't know. I don't have 11.x but I think what I'd try is just doing the EQ as for 7.1 (with the height/width processing turned off), then turn the processing back on.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

Please Log in or Create an account to join the conversation.

Nano AVR with 11.x 7 years 5 months ago #12831

  • MX48
  • MX48's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 12
  • Thank you received: 0
Thanks.
I already have MDSP's for active xo/eq on my LCR, but my surrounds run off the AVR built in amps so I was looking for a way to eq
those 8 speakers. $300 would probably be more than I would want to spend to just do 4 of them.

Please Log in or Create an account to join the conversation.

Nano AVR with 11.x 7 years 5 months ago #12834

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
Hm. Well, I guess that's a conundrum.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

Please Log in or Create an account to join the conversation.

Nano AVR with 11.x 7 years 5 months ago #12835

  • MX48
  • MX48's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 12
  • Thank you received: 0

Hm. Well, I guess that's a conundrum.

Just one of about a hundred when you are on a budget :).
-Would like to upgrade the woofers in my LCR.
-Would like to upgrade my projector so I only need one to fill my 185" wide scope screen.
-Would like to...you get the idea.

Please Log in or Create an account to join the conversation.

Nano AVR with 11.x 7 years 5 months ago #12865

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 8904
  • Thank you received: 1261
@ MX48,

John indeed already answered correctly. The feed that is modified is the HDMI feed for audio which is up to 8ch. Derived channels (e.g. more than 8ch) and not part of the HDMI stream can't really be created unless if you were to use an HDMI spiltter of some sort (e.g. 2 HDMI feed being processed.

DevTeam
miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam