Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

nanoAVR DL setup question 5 years 6 months ago #36937

  • Shades228
  • Shades228's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
I'm thinking about purchasing the nanoAVR DL. I have a Sony 1080 and I would have my xbox one s and AppleTV 4k connected to it then to the Sony input. My subs are going to be driven by an inuke 6000dsp. I'm assuming that I would configure the subs using REW and then run Dirac Live to get the other speakers dialed in. I'm guessing that I wouldn't use DCAC and if so I'm concerned about how the other inputs would sound.

Please Log in or Create an account to join the conversation.

nanoAVR DL setup question 5 years 6 months ago #37017

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9241
  • Thank you received: 1517
@ Shades228

The important first question to ask is to make sure that you indeed have the ability to enable PCM on each of these.. (limitation of the unit that it can't accept) .Also not that we don't support 4k on this unit (up to HDMI1.4only)

Indeed tuning the subs first using REW (and whatever DSP you have for these?) and then using Dirac overall..

DevTeam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam