Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

NanoAVR HDA clipping level? 5 years 10 months ago #35294

Tarzan
Topic Author
Offline
New Member
Posts: 5
Thank you received: 2

For now when I am using a HTPC as the only source I am using a DSP in windows. Therefor I am using the nanoavr HDA as a multichannel DAC and volume control.

To prevent the windows-based DSP from clipping I have had to reduce its overall gain on all channels. This makes the fact that the nanoavr HDA doesn't go over 0 dB a limitation on certain material recorded on a lower level.

At what level does the nanoavr HDA start clipping? Can put all the levels on +12 dB, or will it then clip in the digital domain?

Please Log in or Create an account to join the conversation.

NanoAVR HDA clipping level? 5 years 10 months ago #35373

devteam
Away
Administrator
Posts: 9243
Thank you received: 1521

@ Tarzan

The answer is that it "depends"... :-)

Feed a -20dBFS signal into a nanoAVR that has the levels at +12 (-20 + 12 = -8dB FS headroom).
Feed a 0dBFS into a nanoAVR with +12dBFS, yes it will saturate. :-)

Makes sense?
Overall, you shouldn't need to boost the signal. It's not a good idea overall. Use your amp for that. That's what it is for, to amplify signals. :-)

DevTeam

miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

nanoAVR

NanoAVR HDA clipping level?