Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

nanoAVR DL Latency 3 years 9 months ago #34800

  • mccoysmith
  • mccoysmith's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 32
  • Thank you received: 2
The FAQ's on Minidsp's site says that the latency of the nanoAVR DL is 26 ms. Is this a mistake and should it correctly be 2.6 ms?
26 ms converts to a distance of approx. 23 ft. The nanoAVR HD is listed with a latency of 3 ms. Any replies are appreciated. See link below.

support.minidsp.com/customer/portal/arti...-a-nanoavr-dl-or-hd-

Thanks

Please Log in or Create an account to join the conversation.

Last edit: by mccoysmith.

nanoAVR DL Latency 3 years 9 months ago #34815

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
Hi, the latency for the Dirac Live version is due to the FIR filtering that Dirac Live does. It's not for distance correction.

I thought it was lower than that (DDRC-88A is 13 ms) but have never measured it on the nano.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The following user(s) said Thank You: mccoysmith

Please Log in or Create an account to join the conversation.

nanoAVR DL Latency 3 years 9 months ago #34883

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 8971
  • Thank you received: 1299
Indeed, something to be double checked by our team. I think that it should be 13mS and not 26mS. Only 96k platforms are 26mS. The nanoAVR DL is most likely 13mS.

Devteam
miniDSP, building a DSP community one board at a time.
The following user(s) said Thank You: mccoysmith

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam