Welcome, Guest

nanoAVR-HD bass management for 2.0 does nothing

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

nanoAVR-HD bass management for 2.0 does nothing 6 years 10 months ago #29974

Tch0rT
Topic Author
Offline
New Member
Posts: 8
Thank you received: 3

I have the latest plug-in and firmware (nanoAVR_BM_110.zip) installed on my nanoAVR-HD and bass management does not appear to work on 2.0 sources. I setup bass management just like in the guide here: www.minidsp.com/applications/home-theate...ning/bass-management

In the plug in I can see the VU lights whatever light up and bounce but nothing is output to my sub. I mainly use JRiver and I have to tell JRiver to either output 2.1 instead of 2.0 (or 7.1 with output on stereo sources as 2.1) for it the sub to even work.

Anyone have any ideas?

Please Log in or Create an account to join the conversation.

nanoAVR-HD bass management for 2.0 does nothing 6 years 10 months ago #29975

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1594	My guess is your HDMI output channel mode is set to Auto. Set it to 5.1 or 7.1 and see if that works The following user(s) said Thank You: Tch0rT
	Please Log in or Create an account to join the conversation.

nanoAVR-HD bass management for 2.0 does nothing 6 years 10 months ago #29976

Tch0rT Topic Author Offline New Member Posts: 8 Thank you received: 3	That did the trick! Thanks! The following user(s) said Thank You: devteam, john.reekie
	Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

nanoAVR

nanoAVR-HD bass management for 2.0 does nothing