Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

NanoAVR DL with ip problem 6 years 10 months ago #26399

sufgi123
Topic Author
Offline
New Member
Posts: 1
Thank you received: 0

I have a problem with my NanoAVR DL .
I can't connect it with the android application.
The application recognize the device, but I see ip 169.254.88.* instead of 192.168.0.* and I can't connect it.
I downgrade the firmware back to 1.26 and still the same problem.
I also connect it to other router but no change.
I connect it to my laptop directly and open the NanoAVR BM software, but it not recognize the device.
How can I solve it ?

Please Log in or Create an account to join the conversation.

NanoAVR DL with ip problem 6 years 10 months ago #26423

sly
Offline
Elite Member
Posts: 219
Thank you received: 127

A 169 IP address means that your device was not assigned an IP address from your router. The simplest solution would be to reboot your router and power cycle your NanoAVR. Make sure your router has DHCP enabled and is not using static IP addresses. Log into your router and see if it recognized your NanoAVR. You should see what IP address it was assigned. If you see a 192 IP address, then try to connect your Android again.

The following user(s) said Thank You: devteam

Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

nanoAVR

NanoAVR DL with ip problem