Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1
  • 2

TOPIC:

Nano AVR DL 5 years 9 months ago #21632

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0
When using the Nano AVR DL do you use Audyssey before or after or not at all?

Please Log in or Create an account to join the conversation.

Last edit: by jacobariel.

Nano AVR DL 5 years 9 months ago #21641

  • john.reekie
  • john.reekie's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
I think "not at all" would be the most likely answer... if you ran Audyssey first, then Dirac will do its thing and you will end up with the same result as not using Audyssey. If you ran Dirac first and then Audyssey, the Dirac calibration will then be messed up.

HTH :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21644

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0
Is the Nano AVR DL easy to use?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21657

  • john.reekie
  • john.reekie's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
Pretty much, the only hard thing (IMO) is getting your head around where to put the microphone for all nine measurements. But it's all explained in the manual, maybe have a read through it and see what you think?
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21659

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0
Thank you. Now I already own the umik 1 and I have a file on the pc. The manual also asks to download the 90 degree file too. How do I find it or do it for the 90 degree one?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21663

  • john.reekie
  • john.reekie's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
Hi again, you get the 90 degree file from the UMIK-1 page - www.minidsp.com/products/acoustic-measurement/umik-1
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The following user(s) said Thank You: jacobariel

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21665

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0

Hi again, you get the 90 degree file from the UMIK-1 page - www.minidsp.com/products/acoustic-measurement/umik-1

ok from what I read. If you installed the umik mic with serial info the 90 degree was installed too, yes?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21666

  • john.reekie
  • john.reekie's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
You enter your serial number on the UMIK-1 page. You should get two files downloaded. If not, there will be links appear to download directly. I just did it for mine, this is what it looks like:


I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Attachments:

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21668

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0

You enter your serial number on the UMIK-1 page. You should get two files downloaded. If not, there will be links appear to download directly. I just did it for mine, this is what it looks like:


Ok thank you! Sorry I am asking too many questions. I haven't received the Nano yet but I am doing some homework to avoid some steps in case something comes up. I have been reading the online manual.

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21674

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0
Does the nano pass 2.0 and 2.2 hdmi for 4k and hdcp?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21675

  • john.reekie
  • john.reekie's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
No, it's HDMI 1.4a (per specifications in manual ;) )
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21676

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0

No, it's HDMI 1.4a (per specifications in manual ;) )

Basically it won't pass it even if the avr is 2.0, 2.2?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21677

  • john.reekie
  • john.reekie's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
[Edit] Sorry my mistake. 4k should pass through, since it is part of the 1.4 specification. I've never tried it. However, you asked if HDMI 2.0 and 2.2 would work. (You did mean the HDMI spec and not the number of channels there - ?) My guess is not, since the nano is a 1.4 device. 2.x is supposed to be backwards compatible, but exactly what that means... well, for a definitive answer, devteam would have to supply that.

Cheers :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

Please Log in or Create an account to join the conversation.

Last edit: by john.reekie.

Nano AVR DL 5 years 9 months ago #21678

  • jacobariel
  • jacobariel's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 0

I would assume that the nanoAVR won't pass through 4k, since 4k is a 2.0 feature and the nano is a 1.4 device. For a definitive answer, devteam would have to supply that. It does support HDCP.

Cheers :)

ok thanks. Also you won't be able to do bitstream only PCM. Why would they do that? Won't the quality degrade plus what happens to Atmos?

Please Log in or Create an account to join the conversation.

Nano AVR DL 5 years 9 months ago #21680

  • john.reekie
  • john.reekie's Avatar
  • Away
  • Platinum Member
  • Platinum Member
  • Posts: 3775
  • Thank you received: 1588
Sorry, see my correction above.

I don't understand the last question.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Moderators: devteam