Welcome, Guest

MCHStreamer in AllRate mode with TWO DACs

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

MCHStreamer in AllRate mode with TWO DACs 5 months 2 weeks ago #63274

mfeif
Topic Author
Offline
New Member
Posts: 11
Thank you received: 2

Hi Friends,
As per the subject, I'm interested in using the MCHStreamer as a multi-channel USB device to feed two downstream DACs over I2S.
I see that in several firmware modes there are more than enough I2S channels. My question is about MCLK/BCLK/LRCLK ... there are only one each of those. In order to have two slave DAC devices, how does one connect it up?
Splitting the wire electrically into two jumper wires in parallel? Daisy-chain? Or is this not possible?

Thank you in advance. I'm a happy owner of a MiniDSP 2x4HD, and want to move a little more into a DIY direction.

Please Log in or Create an account to join the conversation.

MCHStreamer in AllRate mode with TWO DACs 1 month 4 weeks ago #65004

BlueRock Offline New Member Posts: 1 Thank you received: 0	Assuming your 2 DACS support the same sample rate, bit depth and serial interface formats, you can use parallel connection to MCLK, BCLK and SCLK, just feeding different SDATA lines to the 2 DACS.
	Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

MCHStreamer

MCHStreamer in AllRate mode with TWO DACs