Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1


WI-DG - Flex Support for IP Connecitivity 1 month 1 week ago #65264

  • penguinpages
  • penguinpages's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 20
  • Thank you received: 1
In configuration of profiles you have to use the USB connection and MiniDSP Device Console.
Once that is done, you can hook up USB port from Wi-DG to Flex and with mobile app with functions of what you get on the physical remote: Mute/Unmute, change preset (1-4), disable/enable DIRAC, and change master volume.

MiniDSP Device Console version 1.1.6   


Are there plans for the IP connection of the MiniDSP Device Console version for more advanced configurations where we have to connect USB cable?  The console notes "network" but only shows if you connect via USB.

The other note about the mobile app: 
1) App displays tags "Preset1" etc..   not the named mode you can / have set in the Console.  Ex: Others in family want it to be set to play movies.. that is "Preset 2"  so they have to be trained to click preset 2 in mobile app , if my Blackbean (IR transmitter) did not get IR transmission correct to set the preset to 2 called "Movie" 
2) App when you add device, and connect.. and see that changes are made when you press buttons... Does not save when you close app and come back.  So every time you launch the application, have to manually type in "hostname and IP"  so it can communicate again.  Can we get this to save connections, or maybe it is me and or iphone?


Please Log in or Create an account to join the conversation.

  • Page:
  • 1