Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Flex digital in/out latency problem. 6 months 1 week ago #64814

  • HKee
  • HKee's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
HI all.

I have two Flex, one is Analogue Balanced(TRS) version, and another is Digital(SPDIF/TOS) version.

I have simple problem and question.

I guess if I use Flex digital version, I could reduce latency that Flex make.

But digital in/out Flex may have almost same latency of Analogue in/out.

The latency was about 3.1~3.5msec. 

1) Analogue in / out  : TRS in -> FLEX -> TRS out
2) Digital in/out        : Tos(optical) in -> Flex -> Tos out ( I connected flex to RME ADI-2 PRO FS. RME ADI-2 PRO's have under 0.1msec latency of AD-DA converting.)

Filter, PEQ, delay, gain and so on were not applied.
Analogue in /out worked like AD/DA converter and Digital in/out worked like digital pass through.

1) and 2) cases showed almost same latency when I measured.

Is there any way to reduce latency of Flex Digital in-> Digital out?

Please give me some advice.

Thanks in advance





 
Attachments:

Please Log in or Create an account to join the conversation.

  • Page:
  • 1