Welcome, Guest
Username: Password: Remember me
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Replacement for 4x10HD 11 months 2 weeks ago #63372

  • bushmeister
  • bushmeister's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
Like many I have been left in a difficult position with no replacement for the 4x10HD.
I have been using this unit for over a decade and need a replacement now.
I am comfortable with the minidsp programming so would like to stay with them if possible.
I need a 4 way crossover, with volume control and analogue inputs as well as the usual digital inputs.
MiniDSP no longer has a product which fits this bill sadly.
So my question.....
Would three Flex units - One digital feeding into two balanced Flex units fit the bill?
I figure the digital unit could take the analogue feed from my turntable and all the other sources, do room correction and volume, then output SPDIF to the two balanced flex units - one left and one right purely for crossover and driver correction?

Would this be feasible?
 

Please Log in or Create an account to join the conversation.

  • Page:
  • 1