Welcome, Guest

Separate IR codes for "power off" and "power on" instead of "power toggle"

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Separate IR codes for "power off" and "power on" instead of "power toggle" 10 months 2 days ago #62897

elinger
Topic Author
Offline
New Member
Posts: 5
Thank you received: 0

Hello,

I'm using a Logitech harmony remote to control my miniDSP Flex. I am using so called activities to control mutliple devices such as an integrated amplifier, TV, miniDSP Flex. There is only a single "power toggle" button for miniDSP Flex and that is not sufficient for all cases.

Does miniDSP Flex support two separate IR codes for powering on and off? If yes, could you please update Logitech harmony database?

Thank you in advance.

Please Log in or Create an account to join the conversation.

Separate IR codes for "power off" and "power on" instead of "power toggle" 10 months 1 day ago #62909

devteam Away Administrator Posts: 9175 Thank you received: 1481	Unfortunately we don't have that ability. We only have one Power Toggle button.. (based from our IR remote). DevTeam miniDSP, building a DSP community one board at a time. For any official support, please contact our technical support team directly @ support.minidsp.com/support/home The following user(s) said Thank You: elinger
	Please Log in or Create an account to join the conversation.

Separate IR codes for "power off" and "power on" instead of "power toggle" 8 months 2 weeks ago #63678

iknowtech Offline New Member Posts: 3 Thank you received: 0	Does anyone know if other commands will Power On the device? Like will an Input command be accepted and power on the unit, and switch to the correct input if the device receives that command input command while in Standby Mode? I don't have a unit if front of me to test that with?
	Please Log in or Create an account to join the conversation.

Separate IR codes for "power off" and "power on" instead of "power toggle" 8 months 2 weeks ago #63733

elinger Topic Author Offline New Member Posts: 5 Thank you received: 0	No, the other commands do not power on the device. Just the power toggle button.
	Please Log in or Create an account to join the conversation.

Separate IR codes for "power off" and "power on" instead of "power toggle" 8 months 2 days ago #63958

onlyoneme Offline New Member Posts: 11 Thank you received: 1	devteam wrote: Unfortunately we don't have that ability. We only have one Power Toggle button.. (based from our IR remote). DevTeam Any chance to add them in the future? There are separate codes for input selection already.
	Please Log in or Create an account to join the conversation.

Page:
1

Support

Community Forum

Community Support

Flex series

Separate IR codes for "power off" and "power on" instead of "power toggle"