Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Support
Community Forum
Community Support
Flex series
Flex TRS -> a pair of Topping PA5's?
NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Flex TRS -> a pair of Topping PA5's? 1 year 3 days ago #60773

  • hifinewb
  • hifinewb's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 10
  • Thank you received: 2
Would the Flex with TRS outputs pair well with the Topping PA5's?  I was planning to bi-amp a pair of Emerald Physics CS2.7's with this setup.  What I do not know is if the output sensitivity of the Flex is a good fit with the input sensitivity of the Topping PA5.  

Flex has output max levels of 4Vrms
PA5 has input sensitivity of 2.6Vrms

Please Log in or Create an account to join the conversation.

Last edit: by hifinewb.

Flex TRS -> a pair of Topping PA5's? 11 months 3 weeks ago #60884

  • hifinewb
  • hifinewb's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 10
  • Thank you received: 2
The Flex balanced TRS pairs wonderfully with the Topping PA5's.  One amp for HF and the other for LF.  Amps are set to about 1/2 volume.  Flex is set to -30 generally for moderate volume but -20 is really loud to me.  This setup runs a pair of Emerald Physics CS2.7's.   Using the Flex as a Xover and PEQ only right now.  Will apply Dirac/FIR at some point.
Attachments:
The following user(s) said Thank You: burninater

Please Log in or Create an account to join the conversation.
  • Page:
  • 1
Support
Community Forum
Community Support
Flex series
Flex TRS -> a pair of Topping PA5's?