Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Atmos System using 2 DDRC-88BMs 3 weeks 5 days ago #62735

  • slm3654
  • slm3654's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 9
I made some changes and additions to this document so I thought I would post the link to the new document:

www.dropbox.com/s/ujh4zaa8gp0z1nb/Home%2...20Equations.pdf?dl=0

I developed this system by first measuring the performance of all components with regard to gain and clipping levels and then derived the equations to find any unknown gains to be set.  I understand that this became rather complex but I believe that this is necessary to make a system perform correctly.  The end result plots seem to confirm this and I believe that the sound of the system also shows the result of all of this effort.

There are more preamps available now that incorporate Dirac and this would have made the system simpler to implement but I believe that the MiniDSP hardware gives more capabilities and flexibility in implementing this system as well as the ability to properly setup multiple subwoofers.

As always I welcome any and all comments regarding this.

Steve
The following user(s) said Thank You: mercury79, asx77, gabo4au

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam