Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Phoenix Connectors for DDRC-88A 1 year 2 months ago #61216

  • thenapking
  • thenapking's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 3
  • Thank you received: 0
I bought a DDRC-88A second hand a few months ago.  Unfortunately it came without any accessories, software or the microphone! Thanks to the staff here I've got the software up and running and I've bought a mike.  I tried to buy the missing terminal blocks but they don't fit (and then I gave up!).  I bought these from RS (I am in the UK, so please if you do reply don't link to products from the US).
Phoenix Contact MSTB 2.5/12-ST 12-pin Pluggable Terminal Block, 5mm Pitch
As I understood from the manual and discussion here these should be the right ones (5mm pitch, 12 way).  But they are too large.  I also only need two ins and outs so I bought a one-row block.  But I should probably get a two row block (or more blocks).  Can some one point me in the right direction?
Thanks!

Please Log in or Create an account to join the conversation.

Phoenix Connectors for DDRC-88A 1 year 2 months ago #61222

  • LenelMan
  • LenelMan's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 2
The terminal blocks R 4 balanced In/Out connections so if that is what you have, the cleanest solution is to purchase the in/out blocks with included XLR in/out pigtails connected directly from MiniDSP.  
The WEB site for MiniDSP has them available.
They R will constructed and make XLR connection quick and clean.

JFB

Please Log in or Create an account to join the conversation.

Phoenix Connectors for DDRC-88A 1 year 2 months ago #61270

  • thenapking
  • thenapking's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 3
  • Thank you received: 0
Thanks.  I hadn't realised you could buy these separately.  Can't see them on this site, but I can see them on  soundimports.eu  which might be cheaper shipping for me as I am in the UK.  

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam