Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Can the MiniDsp Flex be used to remove the analog crossover of two way speakers 3 months 3 weeks ago #61035

  • Pygmy
  • Pygmy's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 1
So - the Flex had 4 outputs.  
This means I should be able to drive 2 two-way speakers with one output per driver if I'm not mistaking.

Is it possible to configure the Flex to use output 1 and 3 for tweeters / high, output 2 and 4 for woofers/low, and then also use Dirac Live..?

And can the Dirac software then be used to figure out the best crossover frequency?

 

Please Log in or Create an account to join the conversation.

Can the MiniDsp Flex be used to remove the analog crossover of two way speakers 3 months 3 weeks ago #61036

  • asx77
  • asx77's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 557
  • Thank you received: 97
The problem is you still have the passive crossover inside your speakers. You're not removing it unless you plan on bypassing it.
Warning: Just because I'm a 'Platinum' member, doesn't mean I know what I'm talking about... It just means I've asked too many questions!!

Please Log in or Create an account to join the conversation.

Last edit: by asx77.

Can the MiniDsp Flex be used to remove the analog crossover of two way speakers 3 months 3 weeks ago #61038

  • Ultrasonic
  • Ultrasonic's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 2213
  • Thank you received: 448

And can the Dirac software then be used to figure out the best crossover frequency?
 

No. miniDSPs can be used to form digital active crossovers as discussed for example in the following link but this is entirely independent of anything Dirac Live can do.

Two way crossover (minidsp.com)

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam