TOPIC:

Hi. This is my first post in this forum. I have just bought a 2x4hd with upgrade to ddrc-24.
I wonder if it's possible to do a crossover for my Magnepan speakers (around 50hz) and use my two svs sb-1000pro from 50hz and under. And at the same time use Dirac live calibration? Or do I have to sett all to bypass?

Thank you for the help.

Yes. So 
Input 1 routed to Output 1 with HPF to Left.
Input 2 routed Output 2 with HPF to Right.
Input 1 and 2 summed and routed to Outputs 3 & 4, so bass is mono. Add LPF and sent to the subs.

But if you have two subs you might want to think about trying MSO and letting it decide the best place for the crossover and let it get the delays and gains set right. You copy everything as a biquad into the minidsp. 

Thank you. MSO, what is that?

Multi-sub Optimiser. There is a good Tutorial on here somewhere. It takes a while to do all the measurements but ic you take your time and follow the tutorial you can't go wrong. 

Actually follow the tutorial upto the point of configuring MSO then use the new wizard feature. 

Watch: