Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Subwoofer to quiet 1 year 7 months ago #56623

dawa
Topic Author
Offline
New Member
Posts: 4
Thank you received: 0

Hello,

i bought a MiniDSP 2x4HD which control a DoubleBassArray. This works fine. Tested with Out1(DDRC) with REW. But when i plug the 2x4HD it again to out3 and start dirac the Volume calibration isn't loud enough (Master Volume =0dB, Dirac3=0dB-->Mesured -46dB). All other channel are much louder. In the DDRC-88A plugin all other channel shows approximately -90dBfs channel 3 shows -160dBfs. Maybe this is the Problem? But i did not find anything to fix it.

MiniDSP 2x4 Jumper
In1 = 2Vrms

MiniDSP DDRC-88A
Jumper In 1-8 = 0,9V
Jumper Out 1,2,4,5,6,7,8=0,9V
Jumper Out 3 = 2V

Thanks in advanced.

Dawa

Edit: I made a factory reset. Now it works with the same settings.

Please Log in or Create an account to join the conversation.

Last edit: by dawa.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

Dirac Series

Subwoofer to quiet