Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Work flow / order of operations? 2 years 10 months ago #49876

  • BriBassGuy
  • BriBassGuy's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
So I have the following calibration tools at my disposal but unsure of the order of operations.

Yamaha Avantage YPOA, MiniDSP DDRC-88, MiniDSP 2x4HD, Inuke Amps, 6 channel amp.

I am running 5.4.4 with 2 active channels on front sound stage, 2 rear surronds, 4 subs, and 4 overheads.
I want DDRC to cover the 3 fronts plus subs and feed the amps and then let the Yammy power just the heights?

Here's my plan of attack but I wanted to see if I got it right.

Step 1.
Sweep current system for baseline.

Step 2.
Remove all existing YPOA / inuke / miniDSP calibration.

Step 3.
Sweep subs at multiple locations and use MSO to integrate up to 4 subs using the DSP 2x4 or inukes DSP.
If I use the inukes DSP It would free up the 2x4 HD to run the active channels?

Step 4.
Setup active cross overs on DDRC88 for from sound stage.
L/R/C SS -- 5.1 --> to DDRC88

Step 5.
DIRAC 88 Calibration for 5.1 (Left Woofer, Left Horn, Center, Right Woofer Right Horn, Left Surround, Right Surround, Sub system on 2x4)

Step 6.
Run YPOA calibration for the 4 atmos channels?

Please Log in or Create an account to join the conversation.

Last edit: by BriBassGuy.
  • Page:
  • 1
Moderators: devteam