TOPIC:

This is a question about what is possibe . I have a DDRC24 HD unit and a DDRC22D in seperate systems . One for a fully active system the other for a passive system which can not be made active.

Now if I ran a session on the DDRC24 with bypass and then did an REW session for left and right speaker then generated the filters and imported them to the DDRC24 and then did a full DIRAC Live session and saved that project it would have the filter settings included in the session .

Could that session and the filters then be loaded into the DDRC22D ? WOuld I then be able to move to the filter creation part of the file and make any adjustments need there and then save the project ? This is because it my be an advantage to use the REW Filters and then add the additional DIRAC Live filters . As far as I am aware there is no way to import any REW Filters directly to the DDRC22D but that may not be accurate so any assistance would be helpful .

Apologies if I am not being clear but I would like to know the following . If I ran an REW session and imported the filters produced in to a DDRC 24 . Then ran a full DIRAC Live session (as this would be for a passive pair of speakers the crossover function would be bypassed but the filter EQ would be left active ) using the DDRC 24 and at the end save that project to a file .

Can I then load this saved DDRC24 project file in to a DDRC22 D and use the the filters and DIRAC settings in that unit ?