TOPIC:

Hi All,

I`ve updated my DDRC-88A firmware and installed the current version of Dirac Live from my user downloads, my pc had a hard-drive change about 2-3 years ago so the Dirac Live and unit firmware has not been updated in that time.

I have a problem with the sound only coming from front left speaker on the Dirac Live channel levels screen, whatever channel I select on an 8 channel setup the test tone only plays through the front left. If I bypass and try the test tones on my Marantz all the channels play correctly so I know all the cabling is still working.

Has anyone come across this please ?

Thanks,
Dave

So just to clarify what`s happening, I have 2 x DDRC-88A units that have both been updated, reset to defaults and DSP reloaded etc.

Only channel 1 plays a test tone on Dirac Live, so if it`s the bed layer it`s front left, if it`s for Atmos it`s top front left.
Any other channel selected and sound comes from channel 1 only, this is the same for either DDRC-88A and whatever layout is selected, 5.1,7.1 or custom etc

I don`t understand this at all.

Thanks,
Dave

Uninstall Dirac Live Calibration / restart / reinstall
Use something like Revo Unistaller to make certain that all files are being deleted...be careful of the registry tree / only delete BOLD

Uninstall Dirac Live Calibration / restart / reinstall
Use something like Revo Uninstaller to make certain that all files are being deleted...be careful of the registry tree / only delete BOLD