Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Dirac IR graph wrong 3 years 9 months ago #43444

  • denver8me4dinner
  • denver8me4dinner's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 3038564518
  • Posts: 490
  • Thank you received: 92
I was experimenting tonight

I have a ddrc24 and upstream a ddrc22d

I disengaged the ddrc22d and ran the ddrc24
On the impulse tab is shows 10ms before and
28ms after when I zoom in on the peak of IR


Now .....I go to my ddrc22d and run it the before is also 10 and 28after.......


What’s going on here? Is the IR graph a made up picture? It should have seen 17ms.

Where is the 10ms coming from? Time of flight is 1.22ms , so there’s multiple errors if you think about this.

Any ideas? :(





fallout new vegas all legendary creatures


I ran rew and got a 17.66ms delay (that seemed right) but is there really 10ms coming from a ddrc22d with Dirac disengaged?

Any help or ideas?

Andrew

Please Log in or Create an account to join the conversation.

Last edit: by denver8me4dinner.

Dirac IR graph wrong 3 years 9 months ago #43557

  • denver8me4dinner
  • denver8me4dinner's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • 3038564518
  • Posts: 490
  • Thank you received: 92
So I think with Dirac turned off some of the delay is still active or something is still on


When I completely unload all the filters and remove them from the ddrc22d it sounds different and the 8ms delay goes away.

So problem solved . Had to unload filters beforehand to get rid of the 8ms

Now it shows correctly. Or at least seems to be right.
The following user(s) said Thank You: devteam

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam