Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

DDRC-24 - Distortion around 190hz in REW 2 years 3 months ago #41939

  • lintoft
  • lintoft's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 20
  • Thank you received: 0
Hi.

At around 35% of the measurement, a strange distortion sets in. This appears when Dirac is activated. I have reset my devices, updated to the latest firmware, redone measurements etc.

Link to video:
imgur.com/P1z9nJa

The issue is not present with Dirac deactivated.

Has anyone here experienced anything similar?

The same issue occurs on two different sets of amps/speakers.

Thanks.

Please Log in or Create an account to join the conversation.

Last edit: by lintoft.

DDRC-24 - Distortion around 190hz in REW 2 years 2 months ago #42220

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 8904
  • Thank you received: 1261
@Lintoft

I believe that you already fixed this but just in case, for other, most typical case is when you're overdriving a speaker or the unit. (i.e. too much boost at specific frequency). Make sure to have a lower signal into the DSP.

devteam
miniDSP, building a DSP community one board at a time.

Please Log in or Create an account to join the conversation.

DDRC-24 - Distortion around 190hz in REW 2 years 2 months ago #42225

  • lintoft
  • lintoft's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 20
  • Thank you received: 0
Yes, I am sorry that I did not update this post.

Lowering the output volume and increasing gain solved the issue.

Thanks again.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam