Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

Dirac Measurement done with 75dB - how to make 80? 4 years 9 months ago #41016

  • Doyanole
  • Doyanole's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 0
Hey

i just received my DDRC88a 5 days ago. I've been playing around with it since , however one thing i noticed that the overall Volume is much lower then before. I've done measurements in REW and the sounds are being measured at 75dB from Dirac. However I would Dirac to do the Measurements at 80dB .

How can i change that ? knowing that the Input Gain was at about -10dB and the Output Volume at -42,5dB

Thanks in advance for the help.

Please Log in or Create an account to join the conversation.

Dirac Measurement done with 75dB - how to make 80? 4 years 9 months ago #41123

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9238
  • Thank you received: 1517
@Doyanole

We're unfortunately a bit unsure as to the question here... Why you have -42.5dB of attenuation? That is a HUGE attenuation..
Indeed, I can understand that you'd have "much lower than before"... That output attenuation being a HUGE loss.. -40dB will be a lot..

once we understand a bit more the question (and reason for such attenuation and why you're simply not increasing the level), we can take it from there. :-)

devteam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.

Dirac Measurement done with 75dB - how to make 80? 4 years 9 months ago #41125

  • Doyanole
  • Doyanole's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 0
so , should i lower the Input Gain and raise the Output Volume ?

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam