Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

Page:
1

TOPIC:

Gain structure 4 years 8 months ago #39951

juszat65
Topic Author
Offline
New Member
Posts: 13
Thank you received: 0

I have quick question regarding optimizing gainstructure in a system with the ddrc 88A .

I ran Dirac and reviewing the data i camee to a conclusion that i cam improve the output from the amplifier with the input sensitivity of 1.4 Vrms ( roughly 2 V) if i swith the output of the ddrc 88a frpm 0.9Vto 2V( i am using unbalanced connectors) . Once i am done do i have to ru a new calibration with Dirac or the previous measurments is going to be ok . I am hoping that i will have a roughly +6dB gain by doing the swith if i understood the charts correctly .

Thanks

Please Log in or Create an account to join the conversation.

Gain structure 4 years 8 months ago #39957

john.reekie Offline Platinum Member Posts: 3778 Thank you received: 1594	As long as all speakers (and subs) are being driven from the DDRC-88A and you change all the switches, you won't need to redo the calibration.
	Please Log in or Create an account to join the conversation.

Gain structure 4 years 8 months ago #40035

AustinJerry Offline Elite Member Posts: 166 Thank you received: 57	Have you reviewed the Gain Management section in this guide? 88A setup Guide The following user(s) said Thank You: devteam
	Please Log in or Create an account to join the conversation.

Page:
1

Moderators: devteam

Support

Community Forum

Community Support

Dirac Series

Gain structure