Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1


DDRC-24 results 4 years 6 months ago #39150

  • engin
  • engin's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
I've used Dirac Live software before.

But since I've retired my computer from my setup, I was left without DRC.

I was using my mixer's GEQ as a temporary solution (just to attenuate two low-end peaks, around ~60 and ~120Hz by ~-15dB using ear).

Finally, I've got the budget for a DDRC-24 and after a few troubles (RCA-XLR cables turns out to be wrongly wired, I've ended up soldering a cable myself)... Here are the results of the room's response.

By the way, the performance of the simple frequency-domain-only GEQ correction surprised me, it was much closer to the Dirac's correction than I've expected it to be.

Anyway, for what it's worth, you can view the L/R/L+R impulse response measurements before and after Dirac here.

Also, a rather bad photo of the tiny studio (it's almost a horrible CUBE! 3m x 3m x 2.7m, a nightmare from an acoustic standpoint), the pale blue dot there is the MiniDSP :)

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Moderators: devteam